How to do routine maintenance of injection molding

(1)   Examination before using

1. Before using the injection molding, we should examine the qualification whether it is suitable for the industry.

2.  To check the equipment whether it is suitable with injection molding

3. The operator should have detailed information of the injection molding performance and be familiar with operation method.http://www.prmindustry.com/

Abstract...Articles section

(2)   Examining injection molding during the process

1.  The operation place must be clean. Inside the mould, it should have no eyewinker.

2.  When using the injection molding, we should obey the rules.

3.  When try the mould, the first sets of products should be examined carefully.

4.  During the working process, we should examine the injection molding conditions. If we find some eyewinkers in the mould, then we should do the maintenance of the injection molding.

(3)   Examination after using

1. After using, we should unload the injection mould from the machine under the operating rules.

2. When swing the injection mould, we should put down it carefully. After unloading the injection mould, we should clean the injection mould